Description
This quality wireless pet fence is the perfect dog containment system which is achieved by creating an invisible electronic fence – Model HT168. The unit has a main controller (transmitter) which is connected to a plastic coated wire loop (200m roll is included). The loop may be used to created an ‘allowed’ or ‘no go’ zone for your beloved pets whom are fitted with receiver collars. You can create several zones each of which must be a wire loop – see additional images for examples of ‘zone’.
Note certain images may display various receivers – this specific unit includes 1x receivers. If required, additional receivers can be purchased separately at a later stage up to a maximum of 7x.
Following completion of the testing and commissioning procedure each loop can be buried in the ground (7-10cm). Where the zone loop wires meet (start and finish) they can be twisted together for the remaining distance to the main controller. Twisted wires create a ‘cancelling’ effect with each other and will not activate the receiver (fitted to your pet via a collar).
The system will require some planning prior to installation. The ‘field’ which is the activation distance either side of the wire can be set in meters. Average setting is 3m per side which creates a total 6m barrier. As your pet approaches the outer limits of the field a warning buzzer will first sound for 20 seconds. Should the audible warning not be adhered to the receiver will initially activate on a very mild setting which will increase in intensity as the receiver get closer the the loop wire itself.
Prior and during initial deployment the system will require extensive initial ‘barrier’ training with your pet. Markers are included to create a visible indication of the electronic fence.
The electric dog fence is a very effective invisible fencing system but requires owner patience, love and initial dedicated training.
Please refer to the enclosed User Manual which offers several training methods and suggestions. (as the owner you alone are best suited to decide which training method is best).
Features:
- PULSED PROPORTIONAL STIMULUS – The closer your pet gets to the boundary, the more frequently the receiver deploys.2. 2.PROGRESSIVE TONE STIMULUS – A warning tone will be issued first, then a pulse stimulus if your dog continues to move closer to the boundary.
- 3 stimulation Modes (1) Vibrate + Audio Tone (2) Vibrate + Low level Pulse and Audio Tone (3) High Level Pulse and Vibrate with Audio Tone (Use the on/off button to cycle through the stimulation modes. One button click per mode Mode 1- LED light flashes once. Mode 2- LED light flashes twice. Mode 3- LED Light flashes 3 times.) (long press on/off button to turn device on or off)
- POWER BOOST SWITCH – Allows the width of the warning are to be adjusted
- SPEED DETECT ANTI-RUN THROUGH – The faster your dog is moving, the quicker the higher level of intensity is issued
- AUDIBLE WIRE BREAK ALARM – The system’s control center has an audible alarm to alert you if it senses a break in the wire or if the boundary system is not functioning correctly
- VISUAL WIRE BREAK ALARM – The system’s control center will light up if a break in the wire is detected.
- QUICK DISCONNECT TERMINALS – quick and secure connection or disconnection of the wire to the control center
- LOW BATTERY INDICATOR – When the light on the collar is green, it is working properly. Red it means time to recharge the battery.
- The update version, receiver is waterproof and reliable.
- Up to 2500 square meters range. Over 1.2 acres.
Product Description:
1. Patented design Model HT168
2.10 levels of signal detective width with to the boundary
3. 4 levels of proportional stimulus warning. The closer to the boundary the more intensity of static and the quicker of the audible tone.
4. Audible and visual wire break and short indication sonic alarm (sound accompanied by a flashing light)
5. fully waterproof and rechargeable receiver collar 6.3 modes of stimulation (1) Vibration / Audio tone mode (2) Vibration / Low static shock and Audio Tone (3) High static shock and Vibration with Audio Tone
Package:
1. 1 x electric dog fence HT168
2. 2 x Receiver Collar
3. 2 x TPU Collar
4. 1 x Test Light Tool
5. 2 x 2 Sets of Metal Probes
6. 1 x English Manual
7. 1 x USB Cable
8. 1 x USB Charger
9. 1 x 200M Wires
10. 20 x Boundary Flags
Facebook [click here] | Twitter [click here] | Instagram [click here] | Youtube [click here]
fence
HenracTech –
Please take the time to review this product. Thank you.
HenracTech –
Your effort to review this product will be much appreaciated
Store Admin –
Please make an effort to review this product. Thank you
Admin –
Reviewing this product after purchase would be appreciated. Thank you.
HenracTech Admin –
Please make the effort to review this product when asked to do so after purchase.. Thank you in advance
HenracTech Admin –
Please consider reviewing this product when asked to do so after purchase.. Thank you in advance